Auxiliary Relay Modes; Strike Lock Mode - E.T. Systems Drive 500 User Instructions

With Strike lock mode selected, the auxiliary relay will pulse for the preprogrammed on me, half a second before the gate opens.
Whenever a lock is installed with the system, a separate ba ery backed up power supply matching the lock load must be installed. Failure to do this
can damage the charger and ba ery of the control unit.
Below is an example of strike lock mode when standard BT mode is ac ve.
Ac on
Momentary BT trigger.
Half a second a er
the auxiliary relay has
ac vated.
A er the
preprogrammed relay
on me.
Gate reaches open
posi on.
Momentary BT trigger.
At full closed posi on.

Auxiliary relay modes.

Strike lock mode.

Gate closed.
Auxiliary relay
No buzzer tone.
ac vates.
Gate begins
No buzzer tone.
opening.
Auxiliary relay
deac vates and
No buzzer tone.
gate con nues
opening.
Gate stops. No buzzer tone.
Gate begins
No buzzer tone.
closing.
Gate stops. No buzzer tone.
15
Basic opera ng
features
Response