Leica X-U 113 Instructions Manual page 183

Hide thumbs Also See for X-U 113:
Table of Contents

Advertisement

Available languages

Available languages

Flash Operating Modes Automatic, automatic/red eye reduction,
ON, ON/red eye reduction, long-term synchronization/red eye
reduction, OFF
Flash Exposure Compensation ±3EV in
Flash Operating Range (for ISO 100/21°)
approx. 0.3 - 2.0m, guide number 5
Flash Recharge Time Approx. 5s with fully charged battery
Monitor 3" TFT LCD monitor with approx. 920,000 pixels
Self-Timer Delay time either 2 or 12s
Operating Conditions Ambient temperature: -10°C-+40°C/14°-
104°F (on land), 0°-40°C/32°-104°F (underwater), max. humidity
85% (non-condensation)
Water/Dust Resistance In compliance with JIS/IEC protection
class 68 (IP68) (in accordance with Leica Camera AG testing
conditions
), allows underwater photography in depths up to 15m /
1
49ft for max. 60 minutes
Impact Resistance In compliance with MIL-STD 810G, method
516.5
(in accordance with Leica Camera AG testing conditions
2
Power Supply Lithium ion rechargeable battery, nominal voltage
3.7V, capacity 1600mAh (as per CIPA standard): approx. 450
exposures, charging time (after deep discharge): approx. 200 min.,
EV increments
Model No. BP-DC8, manufacturer: PT SANYO Energy Batam,
1
3
manufactured in Indonesia
Charger Input: 100 - 240V AC, 50/60 Hz, 0.2A, automatic
switchover, output: 4.2V DC, 0.65A, Model No. BC-DC8, operating
conditions: 0 - 35°C/32°-95°F Manufacturer: Phihong (Dongguan)
Electronics Co.,Ltd, Made in China
Housing Plastic core, aluminum upper and lower covers, flexible
TPE reinforcement
Tripod Thread A
Dimensions (WxHxD) Approx. 140 x 79 x 88mm /
5
Weight Approx. 600/635g / 21.16/22.4oz (without/with battery)
)
1
1
2
Subject to changes in structure and design.
DIN 4503 (
1
4
x 3
x 3
"
33
1
15
64
8
32
These testing conditions do not constitute a blanket warranty in terms of damage
or destruction; purely cosmetic damage as a result of the impact test, e.g. damage
to the color or deformation and also water tightness after the impact test are not
part of the water resistance tests. Water resistance tests do not apply for any other
liquids except sweet or salt water, and not for current or jet pressure.
The test entails a fall of the camera from a height of 1,22m /48" onto a wood
surface with a thickness of 5cm /2".
")
1
4
EN
179

Advertisement

Chapters

Table of Contents
loading

Table of Contents