Table of Contents
Advertisement
Cable type F
You need this cable to use with monochrome monitors which have a phono input
socket. You need a 15-way plug to phono socket adaptor with resistors, to mix the
separate red, green and blue signals into a composite monochrome signal (you can fit
these components into a 15-way connector shell).
You need an adaptor cable that has a 15-way D-type plug on one end, and a phono plug
on the other. The connections are as follows:
Appendix B: Monitor connections
Note: HSync (pin 13)
linked back into IDO (pin
11) tells the computer
that Composite sync (
CSync) is required rather
than VSync on pin 14
and that only modes
compatible with a TV
standard monitor can be
displayed.
Advertisement
Table of Contents
