Table of Contents
Advertisement
Switching on
3
Switch the computer on, by pressing the ON/OFF switch on the front (the green
light on the lefthand side of the computer's front panel will light up). Depending
on your monitor (and whether it has warmed up yet) you might see the screen
change colour while the computer performs some self-tests. The light on the
floppy disc drive will also flash once when the drive is being checked. Next, you
will see an introductory screen:
After a few seconds, you should have a picture on your screen, looking
something like this:
If the display does not look similar to that shown above (or if the floppy drive
light flashes more than once) see If things go wrong on page 63.
Advertisement
Table of Contents
