Table of Contents
Advertisement
Choose Configure... to display the
configuration dialogue box.
Change any settings that aren't correct (refer to
the manual supplied with your printer).
The only options you'll need to worry about for
now in this window are Resolution, Paper
feed... and Quality.
For example, you can set Paper feed... to Manual
or Auto. If you need to change it, click on the
arrow to the right of the box and choose from the
Paper feed menu that appears (the manual for
your printer will tell you which type it uses.)
When you're satisfied, click on OK.
(Experiment with the other options when you
want a better quality print of your work.)
5 Set the Connection options
Click Menu on the printer name in the Printer
control window to display the Printers menu
again. This time choose Connection.... You'll
see the Connections window displayed.
Click on the button to the left of the connectior
that your printer uses.
In the case of the 1P-150, choose Parallel.
Click on OK. The details in the Printer control
window will change to reflect your choice.
6 Activate the printer (if necessary)
Choose Active from the Printers menu (you'll
only need to do this if you drag more than one
printer definition onto the Printer control window
— the first printer is set to active by default).
7 Save the settings
It's a good idea to save the settings you've just
made. See Saving printer configuration settings
on page 59.
Printing
Advertisement
Table of Contents
