Table of Contents
Advertisement
Setting up
1 Make a copy of !Printers
Open the App1 directory display. Copy ! Printers
to your root directory. Use the copy, not the
original so that you always have an unchanged
version you can fall back on.
2 Load !Printers
Load !Printers by double-clicking on its icon.
After a few seconds its icon will appear on the
lefthand side of the icon bar, ready to use.
Click Menu on the icon bar icon and choose
Printer control.... This will display the Printer
control window. You'll use this in the next step.
3 Load a printer definition
Open the directory called Printers in the App2
directory display.
Open the subdirectory which corresponds to the
make of your printer (for example, Acorn).
You'll then see a directory display containing all
the available printer definitions.
Decide which printer definition suits your printer.
Load it by dragging its icon into the Printer control
window. (If you can't see a printer definition that
matches your printer, see Problems with printing on
page 60).
For example, load the definition called JP-150,
which is specifically for the Acorn JP-150
printer.
The Printer control window will change to include
details of the printer definition you've just loaded,
and so will the icon on the icon bar.
4 Set the Configure options
Click on the printer's name in the Printer control
window (this will highlight it) then click Menu.
This will display the Printers menu.
Advertisement
Table of Contents
