Table of Contents
Advertisement
Connect other peripherals to computer
Connect any other peripherals you have (such as a
printer or a modem) before you switch on the
power. Most printers use the parallel printer port
on the rear of the computer. Appendix C:
Attaching peripheral devices on page 79 gives you
some advice.
Connect other peripherals to power supply (but
don't switch on yet)
Connect the power cables for any other
peripherals to power outlets on the wall.
Connect computer to power supply
Finally, plug the connector on the computer power
cable (the one that looks like the type you plug
into a kettle) into the socket marked 2A 220-240V
on the back of the computer unit. Plug the other
end into the power supply outlet on the wall.
Don't switch on the power supply yet: follow
the instructions in the next chapter.
Setting up the computer
Advertisement
Table of Contents
