Advertisement
Quick Links
查询TH-50PH9供应商
Acorn A3020 and A4000 Econet
module installation
Introduction
Applicable models
These instructions explain how to install an Econet module into the
Acorn A3020 and A4000.
Parts required
An Econet module upgrade kit (AEH52).
Tools required
A Pozidriv No. I screwdriver (or similar).
Packing list
The kit should contain the following items:
•
An Econet module printed circuit board (PCB)
•
An Econet cable
•
An Econet label
A3020 and the A4000 Econet Module installation instructions(this
•
document)
•
An Acorn Registration card
•
A Guarantee card.
If any of these items is missing or damaged, please contact your
supplier immediately.
捷多邦，专业PCB打样工厂
instructions
，24小时加急出货
Advertisement
Related Manuals for Acorn Computers Limited A3020
Summary of Contents for Acorn Computers Limited A3020
- Page 1 The kit should contain the following items: • An Econet module printed circuit board (PCB) • An Econet cable • An Econet label A3020 and the A4000 Econet Module installation instructions(this • document) • An Acorn Registration card • A Guarantee card.
-
Page 2: Fitting The Kit
PCB) of any Acorn equipment is undertaken at the sole risk of the person carrying out the modification or upgrade. Acorn Computers Limited cannot accept any liability for damage caused to the product during installation of internal upgrades, whether or not carried out in accordance with the instructions in this document. - Page 3 Acorn A3020 and A4000 Econet module installation instructions Disassemble the computer A3020 To remove the top cover of the A3020, follow the instructions in Appendix Inside the computer Welcome Guide. in the Acorn A3020 Note that the only screws you need to unscrew to remove the top cover are those marked with the symbol shown here.
- Page 4 Fitting the kit The Econet module PCB should be positioned as shown in Figure Fitting the Econet module: Figure 1: Fitting the Econet module Make sure that • the pins of PL1 on the Econet module are aligned with the corresponding holes in socket SK13 on the main PCB •...
- Page 5 Acorn A3020 and A4000 Econet module installation instructions Reassemble the computer A3020 Reassembly is explained in E: Inside in the Appendix the computer Acorn A3020 Check all connections have been made securely. Welcome Guide. Stick the Acorn Econet label above the Econet connector, and connect the Econet cable to the Econet connector.
- Page 6 Fitting the kit A4000 Appendix Inside the computer Reassembly is explained in in the Acorn Welcome Guide. A4000 Check all connections have been made securely. Stick the Acorn Econet label above the Econet connector, and connect the Econet cable to the Econet connector. (Note that the cable only Figure fits one way round.) The locations of these are shown in 3: The...
- Page 7 Acorn A3020 and A4000 Econet module installation instructions...
- Page 8 Econet is a trademark of Acorn Computers Ltd. Copyright © 1992 Acorn Computers Limited P u b l i s h e d b y A c o r n C o m p u t e r s L i m i t e d...