Table of Contents
Advertisement
Step 12: Configure the operating mode
For more detailed information about this process, please refer to section "2.3. Configuring
the Boot Mode"
Step 13: Create an autoexec.bat file
i. Open the "Notepad"
ii. Type the "HELLO.exe"
iii. Save the file as autoexec.bat
Step 14: Upload programs to I-8000 using MiniOS7 Utility
For more detailed information about this process, please refer to section "2.5.2. Uploading
and Executing Programs"
One is the "Hello"
application file, and the
other is the
"autoexec.bat" batch file
I-8000 Series (C Language Based) User Manual, Version 1.0.1
Page: 75
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Advertisement
Table of Contents
