Table of Contents
Advertisement
3. COM3 (RS-232/RS-485)
Port Type: Male
Baud Rate: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 bps
Data Bits: 5, 6, 7, 8
Parity: None, Even, Odd, Mark (Always 1), Space (Always 0)
4. COM4 (RS-232)
Port Type: Male
Baud Rate: 115200, 57600, 38400, 19200,
9600, 4800, 2400, 1200 bps
Data Bits: 5, 6, 7, 8
Parity: None, Even, Odd, Mark (Always 1), Space (Always 0)
Stop Bits: 1, 2
FIFO: 16 bytes
5. DIP Switch
The DIP switch can be used to set the Module ID to a
number from 0 to 255. Do not use Module ID 0 for
communication.
I-8000 Series (C Language Based) User Manual, Version 1.0.1
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
COM3 can be configured as either RS-232 or RS-485, that only can
select one at a time and its configuration depends on the pin
connections as follows:
RS-232 (RXD, TXD, CTS, RTS and GND)
RS-485 (Data+ and Data-)
There is no software configuration or hardware jumper needed.
Page: 19
Advertisement
Table of Contents
