If PC/Laptop has no COM port, you can use the I-7560 (USB to RS-232 converter) for
connection between I-8000 and PC/Laptop.
Before using the I-7560 converter, you must install the USB driver.
The USB driver can be obtained from:
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7000/756x/
After installing the USB driver, please check the "Device Manager to make sure the driver has
been installed and the COM port number which is assigned to USB interface.
I-8000 Series (C Language Based) User Manual, Version 1.0.1
Page: 30
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com