Wheels Installation Instructions - Deda Elementi SL38C User Manual

WARNING: Since specific tools and experience are necessary for proper
sprockets installation, in case of doubts it is recommended that the product be
installed by an official Deda Elementi dealer or a qualified bicycle technician. An
incorrect sprockets installation can cause serious accidents and injury for the
user.
WARNING: Please make sure that wheel freehub body be compatible with
your sprockets cassette before proceed with the assembly. Failure to insure
compatibility between wheel and sprockets cassette can cause malfunction of
the bicycle drive train resulting in serious accident and injury for the user.
WARNING: Since specific experience is necessary for proper wheels installation,
in case of doubts it is recommended that the product be installed by an official
Deda Elementi dealer or a qualified bicycle technician. An incorrect wheels
installation can cause serious accidents and injury for the user.
Fig 2
20
Insert the quick release into hub so that the lever be on the non drive side of
the wheel and tighten the quick release nut slightly on the opposite side of
the lever. (Note: front quick release is shorter than rear)
Install the front and rear wheel respectively into the fork and frame drop-outs.
Tighten the quick release nut untill is in contact with the fork or frame drop-
outs.
Close the quick release lever from the Open to the Closed position; if
necessary adjust the closing force manually through the nut (tightening the
force increases, untightening the force decreases) (Fig. 2).

WHEELS INSTALLATION INSTRUCTIONS

Closed
Open