10 Appendices; Troubleshooting; Error Messages - Ricoh CX1 User Manual

10 Appendices

Troubleshooting

Error Messages

If an error message is displayed on the screen, check the
information on the reference page and take the corresponding
action.
Error Message
Insert card.
Set date.
The file number limit has been
exceeded.
Unmatched File
Insufficient memory. Continue?
Protected
Card Is Write-Protected.
Print settings cannot be applied to
this file.
Insufficient Memory
Format internal memory.
Format card.
Card Error
Writing Data
File not found
Out of memory. cannot record.
No files to restore.
10
212
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card. P.187
This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file.
All the files cannot be copied because there is insufficient
memory on the card. Use another card.
The file selected for deletion is protected.
The card is locked (write-protected). Unlock the card.
This file (movie or other file) cannot be selected for printing. -
Files cannot be stored. Make sure there is sufficient memory
or delete unwanted files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
The internal memory requires formatting.
The card is not formatted. Format the card with this camera. P.163
Reformat the card. If the error message still appears after
that, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The number of remaining shots is 0. Switch to another card
or the internal memory.
There are no files to restore.
Refer to
P.28
P.188
-
P.25
P.149
P.26
P.52
P.163
P.164
P.195
P.164
P.163
-
-
P.25
P.157