Saving Images You Want To Quickly Display (Flag Function Setting); Setting/Canceling One File At A Time - Ricoh CX1 User Manual

Saving Images You Want to Quickly
Display (Flag Function Setting)
You can set useful image files, such as a train time table or a map,
to [Flag Function Setting], and then press the Fn (Function) button
during playback to easily display these files whenever you like. Up
to three files can be saved with [Flag Function Setting].

Setting/Canceling One File at a Time

1
Press the 6 (Playback) button.
2
Press the ADJ./OK button !"#$ to display the file you
want to set or cancel.
3
Press the MENU button.
• The playback menu appears.
4
Check that [Flag Function
Setting] is selected and press
the ADJ./OK button $.
• The [Flag Function Setting] screen
appears.
6
5
Make sure that [Set] is selected
to save a file or [Cancel] is
selected to cancel a file, and then press the ADJ./OK
button.
• When a file is set, the symbol appears on the screen.
• If three files have already been set, no more files can be set.
Note ----------------------------------------------------------------------------------------------
If an enlarged still image is set, the magnification ratio and magnified area are saved and
the enlarged image can be displayed as is.
136