Using The Self-Timer - Ricoh CX1 User Manual

Using the Self-Timer

You can set the self-timer to shoot after either two or ten seconds,
or you can select [Custom] to customize the self-timer setting.
With [Custom], you can take a set number of pictures at a set
interval. Use [Custom Self-Timer] on the shooting menu to set the
shooting interval and number of pictures for [Custom]. (GP.113)
1
With the camera ready to shoot, press the t (Self-
timer) button.
• A list of self-timer mode settings appears on the picture display.
2
Press the ADJ./OK button !" to select a mode.
• The Self-timer symbol appears
on the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the
camera shoots after 10 seconds.
3
Press the shutter release button.
• When set to [10], the self-timer lamp lights for 8 seconds when
the self-timer starts and then blinks for the final 2 seconds before
the picture is taken.
• When set to [Custom], the self-timer lamp blinks for 2 seconds
before each picture is taken, and pictures are taken at the set
shooting interval. The focus position is set for the first shot.
• When set to [Custom], press the MENU button to cancel the self-
timer during shooting.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t button and change the self-timer setting to [Self-Timer Off].
• When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink.
• You can only select [10] in easy shooting mode.
• When the self-timer is set, the [Interval Shooting] setting is disabled.
• [Custom] is not available when [Focus] is set to [Multi-trgt AF].
• If [Focus] is set to [Multi-trgt AF] while [Custom] is selected, [Custom] is canceled and
the self-timer is turned off.
45