Date And Time Settings - Ricoh CX1 User Manual

Date and Time Settings

You can shoot still images with the time or date stamped onto the
picture.
The date/time setting on the setup menu is explained here.
1
Display the setup menu.
• For the operating procedure, see P.161.
2
Press the ADJ./OK button " to
select [Date Settings] and
press the button $.
3
Press the button !"#$ to set
the year, month, date, time and
format.
• Change the setting with !" and
move the item with #$.
4
Check the information on the
screen and then press the
ADJ./OK button.
• The confirmation screen appears.
5
7
Press the ADJ./OK button.
• Once you have set the date and time, the display returns to the setup
menu.
6
Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power for
more than two hours.
188