10 Appendices; Troubleshooting; Error Messages - Ricoh CX4 User Manual

Samsung digital camera user manual
Hide thumbs Also See for CX4:
Table of Contents

Advertisement

10 Appendices

Troubleshooting

Error Messages

If an error message is displayed on the screen, check the information
on the reference page and take the corresponding action.
Error Message
Insert card.
Set date.
The file number limit has been
exceeded.
Unmatched File
Insufficient memory. Continue?
Protected
Card Is Write-Protected.
Print settings cannot be applied
to this file.
Insufficient Memory
Format internal memory.
Format card.
Card Error
Writing Data
No File
Out of memory. cannot record.
No files to restore.
10
Can not —. *
* "—" indicates the name of the process that can not be applied.
118
Cause and Solution
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card. P.102
This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file.
All the files cannot be copied because there is insufficient
memory on the card. Use another card.
The file selected for deletion is protected.
The card is locked (write-protected). Unlock the card.
This file (movie or other file) cannot be selected for
printing.
Files cannot be stored. Make sure there is sufficient
memory or delete unwanted files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
The internal memory requires formatting.
The card is not formatted. Format the card with this
camera.
SDXC cards can not be used. If the card is not an SDXC card,
format the card; if the message persists, the card may be
faulty and should not be used.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The number of remaining shots is 0. Switch to another card
or the internal memory.
There are no files to restore.
Selected option can not be applied to image more than
once, or image was created with different make of camera.
If image was created with different make of camera,
process image using original make of camera.
Refer to
P.24
P.102
P.22
P.95
P.22
P.37,
P.99
P.108
P.99
P.99
P.99
P.22
P.87

Advertisement

Table of Contents
loading

Table of Contents