Using Skew Correction Mode - Ricoh CX1 User Manual

Using Skew Correction Mode

1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
Press the MENU button.
• The scene mode selection screen appears.
3
Press the ADJ./OK button !"#$ to select [Skew
Correct Mode].
4
Press the ADJ./OK button.
5
Press the shutter release button to shoot the picture.
3
• The display indicates that the image is being processed, and then the
area recognized as the correction range is displayed with an orange
frame. Up to five areas can be recognized.
• If the target area cannot be detected, an error message appears. The
original image remains unchanged.
• To select another correction area, move the orange frame to the target
area by pressing the ADJ./OK button $.
• To cancel skew correction, press the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
6
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
When [Skew Correct Mode] is selected, note the following:
• To shoot the subject as large as possible, position it so that the entire portion of the
subject is visible on the picture display.
• The camera may fail to recognize the subject in the following cases:
• When the image is out of focus
• When four edges of the subject are not clearly visible
• When it is hard to distinguish between the subject and background
• When the background is complicated
• Two images, one before correction and the other after correction, are recorded. If the
number of remaining shots is less than two, you cannot shoot the subject.
• The correction area may not be detected properly if the [Date Imprint] function is
activated.
Note ----------------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image. (GP.147)
78