Correcting Images Manually - Ricoh CX1 User Manual

Correcting Images Manually

5
Press the ADJ./OK button !" to select [Manual] and
press the button $.
• The original image appears at the upper left of the screen, the
histogram is at the lower left, and the corrected image is shown on the
right.
• If you select a file that cannot use level compensation, an error
message appears and you are returned to the playback menu.
• To cancel level compensation, press the DISP. button.
6
Press the MENU button to
switch between points on the
histogram.
• A histogram shows the number of
pixels on the vertical axis and the
brightness on the horizontal axis,
ranging from shadows (dark areas) on
the left through midtones to highlights
(bright areas) on the right. Each time
you press the MENU button, the
selected point switches from the left point, to the middle point and then
to the right point.
• Pressing the Fn (Function) button at this point displays the screen for
describing the operating procedure. Pressing the Fn button again
returns the display to the previous screen.
7
Press the ADJ./OK button #$ to correct the image by
adjusting the location of the selected point.
• Moving the left or right point moves the middle point also.
Level Compensation [Manual]
Chng. Points
Cancel
Points
Help
Ok
6
143