LCD Image Confirmation Time
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 0.5
second, but this can be changed.
Available Settings
Off (The image is not displayed for confirmation.)
0.5 seconds *Default setting
1 second
2 seconds
3 seconds
Hold (The image remains displayed until the next time you half-press the shutter release
button.)
1
Display the setup menu.
• For the operating procedure, see P.161.
2
Press the ADJ./OK button " to
select [LCD Confirmation
Time] and press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
When [LCD Confirmation Time] is set to [Hold], the displayed image can also be enlarged
(GP.50) or deleted (GP.52).
7
177