High And Low Limit Alarm - PCE Health and Fitness 5000H User Manual

•
Delete whole group readings (Tip: If in measure mode, hold the "UP Key" by one beep)
a. Press "Left Key" once to enter menu mode ("Root" directory).
b. Press "Up Key" or "Down Key" to activate "Delete Data" item, and press "Left Key"
once to enter.
c. Press "Up Key" or "Down Key" to activate "Current Group" item, and press "Left
Key" once. A dialog box will be displayed.
d. Press "Left Key" once to confirm the selection and go back, or "Right Key" to cancel
and back. Press "ZERO Key" to go back to measure mode.
•
Recall and delete specified readings
a. Press "Left Key" once to enter menu mode ("Root" directory).
b. Press "Up Key" or "Down Key" to activate "Recall" item, and press "Left Key" once
to enter.
c. Press "Up Key" or "Down Key" to recall the readings (n/Total number, "n" indicates
the index of currently shown readings). User can press "Left Key" to delete
currently shown readings.
d. Press "Right Key" to go back. Press "ZERO Key" to go back to measure mode.
Note: While readings deleted, the statistics will be upgraded automatically.
5.10

High and Low Limit Alarm

Each group has individual high/low limit alarm settings. When you switch the work group, the
applied alarm settings will also be switched automatically.
•
Set high/low limit for the current work group as below.
a. Press "Left Key" once to enter menu mode ("Root" directory).
b. Press "Up Key" or "Down Key" to activate "Limit" item, and press "Left Key" once to
enter.
c. Press "Up Key" or "Down Key" to activate "Settings" item, and press "Left Key" once
to enter.
d. Press "Up Key" or "Down Key" to activate your intended item, and press "Left Key"
once to enter.
e. Press "Up Key" or "Down Key" to increase or decrease the limit value. If you hold
the key, the limit value will be increased or decreased continuously.
f. Press "Left Key" to confirm new limit value, or "Right Key" to cancel and back. Press
"ZERO Key" to go back to measure mode.
•
Clear high/low limit
a. Press "Left Key" once to enter menu mode("Root" directory);
b. Press "Up Key" or "Down Key" to activate "Limit" item, and press "Left Key" once to
enter.
c. Press "Up Key" or "Down Key" to activate "Clear" item, and press "Left Key" once. A
dialog box will be displayed.
d. Press "Left Key" once to confirm the selection and go back, or "Right Key" to cancel
and back. Press "ZERO Key" to go back to measure mode.
Note：While readings exceed high limit, the alarm symbol will be shown on the LCD, and while
readings exceed low limit, the alarm symbol will be shown.
© PCE Instruments
9