How To Assemble Your Monitor Hardware - BenQ EX Series User Manual

How to assemble your monitor hardware

• If the computer is turned on, you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may
vary depending on the purchased model.
• The supported timing may vary by input signal. Refer to the "Preset display modes" section on the link
"Adjusting the Screen Resolution" on the CD for more information.
• Avoid finger pressure on the screen surface.
Be careful when handling the sharp monitor base and protect yourself from any physical harm.
1. Attach the monitor base.
Your monitor comes with a curved screen and the screen surface should never be placed on the desk without a
cushion underneath.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Open the box, and remove the cushion that protects
the back of the monitor.
2. Lift the monitor.
Take the monitor out of the box by holding the stand
arm. Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
Remove the foam wrap from the monitor.
Consider keeping the box and packaging in storage for use in
the future when you may need to transport the monitor.
The fitted foam packing is ideal for protecting the monitor
during transport.
10 How to assemble your monitor hardware