1. Introduction
The EATON Automatic T ransfer Switch (ATS) is a high availability switch designed for providing redundant
power for sensitive equipment. It is powered by two independent power sources and automatically makes
a rapid switch from one source to the other when the power supply used to power its connected load fails.
This ATS is designed to be efficient and reliable.
Users can know EATON ATS's power flow, status, parameters from the LCD interface. Besides, the
EATS16N unit has a network interface for users to read and write parameters. T he network interface can be
implemented via the Ethernet protocol through an RJ45 connector.
2. Presentation
2.1
Weights and dimensions
Rack installation
Description
EATS16
EATS16N
2.2.
Rear panel layout - EATS16 - EATS16N
1
2.3
Control panel
The ATS has three buttons on the control panel and a LCD display. It provides useful information about the
ATS itself, load status, events, measurements and settings.
1
Page 4
W
Weights
(kg / lb)
3.32 / 7.31
3.54 / 7.8
3
2
D
Dimensions H x W x D
(mm / inch)
43 x 438 x 250 / 1.7 x 17.24 x 9.84
43 x 438 x 250 / 1.7 x 17.24 x 9.84
3
4
2
5
3
4
H
Input Source 1: IEC C20 inlet
1
Input Source 2: IEC C20 inlet
2
Output: 8 x C13 10 A
3
Output: 1 x C19 16 A
4
LCD panel
1
Navigation: Scroll down button
2
Navigation: Enter button
3
Navigation: Escape button
4
T ransfer Test: Scroll down and Enter
5
buttons pressed for 5s
EATS16_EN