Siemens SENTRON PAC3200T Product Manual page 47

"Digital output" parameter
The following functions can be assigned to the "Digital output" parameter:
● Energy pulse output; can be programmed for active or reactive energy pulses
● Indication of the direction of rotation
● Operating state display of the device
● Signaling of limit violations
● Switching output for remote control via the interface
USAGE TYPE
LIMIT
COUNTER SOURCE
PAC3200T
Manual, 04/2017, L1V30415168B-01
Usage type of the digital input.
Not used: Digital output is deactivated.
Device ready for operation: Digital output is activated.
Remote output: The digital output is controlled by remote
access.
Rotation: Digital output is switched on by an electric
counter-clockwise rotating field and remains active for as
long as the field is rotating in this direction.
Limit violation: Digital output is switched on by a limit
violation and remains active for as long as this persists.
The "COUNTER SOURCE" property selects the limit
value to be monitored. The definition of the limit is stored
in "Advanced > Limits".
Energy pulse: Digital output signals the number of pulses
set for each energy unit (e.g. kWh). The energy counter
specified in the "COUNTER SOURCE" field is evaluated
here.
Default setting: Not used
Selects the limit value whose status is output to the digital out-
put.
Range: Limit 0 to 5 and limit logic
Default setting: Limit logic
The "UNIT" property is only visible if "Limit violation" is set for
the "USAGE TYPE".
Selects the type of cumulative power and the import value that
triggers the pulse when that value is reached.
Range: Counter import active energy (kWh), counter
export active energy (kWh), counter import reactive en-
ergy (kvarh), counter export reactive energy (kvarh)
Default setting: Counter Import Active Energy (kWh)
The "COUNTER SOURCE" property is only visible if "Energy
pulse" is set for the "USAGE TYPE".
Commissioning
6.3 Parameterizing the device
47