Automation Direct CTT-1C-D24 Manual page 182

Keypad set up of the parameters for Timer + Counter mode:
To enter the page for parameter setting of the counter, press
After the setup is completed, press
return to the main menu.
Select functions: There are 4 modes in CTT, (left to right) timer, counter, tachometer and timer + counter.
or
–FunC time
Ä
Select timer mode: times up and times down,
t–mode or ––UP
Ä
Select output modes: There are 8 output modes.
or
t–otmd Sond1
or
–rCy
Ä
Select display unit: the min. unit 10ms - the max. unit hour are selectable.
or
t–unit s–001
or –m–1
Ä
Select input modes: Only counting up and counting down are available.
C–inPt or ––UP
Ä
Select output modes: Same as the output modes of the counter except for S, T, D.
C–otmd
or
F
or q
Ä
Select counting speed: Maximum 5Kcps; others 1K, 200, 30 and 1cps.
or
C–Sped ––5k
Ä
Pulse width of output 1: The default output time is 0.02 second. When the parameter is set to 0.00 second, the
output status will be maintained ON.
t–out1 or –002
Pulse width of output 2: This paramter is adjustable according to different output modes selected. If the output mode is C,
Ä
the default output time will be 0.02 second, When the parameter is set to 0.00 second, the output status will be maintained ON. Not
available in Output Modes F and N.
t–out2 –002
or
Ä
Set up the position of decimal point: 0 (no decimal point), 1 (one digit after decimal point), 2 (two digits after decimal
point), 3 (three digits after decimal point).
–point or 0
Ä
Set up pre-scale value: 1.000 (default 1:1) Range: 0.001 to 99.999
or
psCale 1000
Ä
Save the data while switching off the power: When SAVE is selected, the PV will be saved; when CLEAR is selected,
the PV will not be saved.
–pwers or Clear
Ä
Set up minimum width of reset signal: Default = 20ms; 1ms is also selectable
or
–rtsr ––20
Ä
Select input signal types: NPN and PNP
inptlC or –npn
Ä
Back to Top
w w w . a u t o m a t i o n d i r e c t . c o m
for more than 3 seconds under any of the parameter page you are in and
Ä
or or
Cont
or down
or or
sond2
or
rCyh
or or
s–01
or hms–1 or
or down
or or or or
n C r
or
a
or or
––1k –200
or –000
–000
or
or 1 or 2 or 3
or save
or
–––1
or –pnp
Digital Counter / Timer / Tach User Manual, 1st Ed.
for the main menu for more than 3 seconds.
Ä
or
taCh –mix
or or
soffd son
or
–s–1 ms–001
hm–1 or –h–1
or
k p
or or
––30
or
pond PondH
or or
ms–01 m–01
–––1
4-17