Advertisement
＜Side Wash Basin ＞
1. Align the neck cushion to the center of
neck core as the below.
Check the direction of the neck cushion-and neck core.
〈Top View〉
Basin side
Seat side
Neck cushion
Neck core
Do not force the neck cushion if it does not fit smoothly.
Instead, check the following points.
Forcing the neck core on may cause damage to the neck base or injury to customers.
● Check the neck core insert the direction.
CAUTION
● If the neck cushion is loose, check the direction of the neck cushion toward the neck core.
● If the neck core dowel hole is clogged with dirt, clean and remove the dirt before use.
■ Attachment Of The Surface Water Travel Prevention Cloth To The Shower Hose
Wrap the cloth at the lowest face of the shower hose
with the hook-and-loop fastener facing upward as shown in the right image.
Basin side
The slit on the
neck cushion
should face the seat side.
Seat side
※The slit on the neck cushion
should face the seat side .
※ Align the center.
Lowest face of the hose
2. Align the height of the neck core and
neck cushion ends (both ends).
Fix the hook light pulling the neck cushion on the
under surface of neck core.
Align the height
Align the height
3. Fix the neck core to the neck base and attach.
Take note of the direction to fix the neck core.
※The slit on the
neck cushion
should face the
seat side .
Neck base
Hook-and-loop fastener side
Surface water travel prevention cloth
28
Fasten the hook
at the bottom surface
of the neck core
Neck core
Hook
Basin side
Seat side
Advertisement
