Advertisement
１
Installation Of Floor Unit
※ A wrong installation procedure of this product may prevent proper installation of the basin body or the chair body.
Make sure to follow the installation procedure below:
１ Take out the floor unit from the packing.
Hold the sections indicated by the arrows
２ Remove the top panel.
1. Use a straight slot screwdriver to completely
loosen the screw for fastening lid.
Screw for fastening lid
Hold the handle part of the top panel swing to open
3.
the top panel swing to right angle.
Top panel swing
5. Hold the opening generated by removing the
maintenance lid and lift the top panel upward.
Top panel
to take out the unit.
Straight slot screwdriver
Maintenance lid
2. Pull the release lever upward to open the top panel swing.
Top panel swing
Remove the maintenance lid and insert it into the
4.
gap of the opened top panel swing .
Maintenance lid
スキマ
Gap
6. Take out the accompanying items from the inside.
13
解除レバー
Release lever
Gap
スキマ
Advertisement
