Advertisement
■ Attachment Of Batteries
This product is battery specification.
Be prepared for AA size battery (LR6,2 pcs)[not included]
This product has a function to sound a warning beep in the case of dangerous action to the basin such as
pushing up the basin by the chair back rest.
The batteries are necessary for sound the warning.
Set them properly according to the descriptions below:
Basin tilting function is for avoiding damage of the product.
It is not for adjusting difference in height.
1 Remove the maintenance cover.
The maintenance cover is mounted by slotting to the screws as shown in the image below.
It is not required to remove the screws.
1. Loosen the screws (two positions: left and right)
※ Loosen each screw on the left and right hand side.
※ Loosen the two left and right screws until the gap between the maintenance cover and the front cover
becomes around 1 cm.
Do not loosen the screws too much.
The maintenance cover may drop off and the cover
CAUTION
may be damaged.
Maintenance cover
<Bottom of the maintenance cover>
Screw
Base cover
＜Back Wash Basin (YUME Basin) The latter of Model No. is without " NB" ＞
Maintenance cover
Packing
Screw
Screw
1 cm
Maintenance cover
Base cover
19
Front cover
Advertisement
