Advertisement
４ Attachment of lid
Attach the lid to the floor unit and then tighten the screw
for fastening lid with a straight slot screwdriver.
４
Carrying The Upper Unit
■ Carrying The Basin
１ Remove the resin case (blue).
２ Unpack the wood frame.
CAUTION
This work should always be done by two people.
The basin body may fall over if it is not supported when the bolt is removed.
３ When the upper unit is carried
○ Hold the top end of the basin and the bottom of the bumper as shown in the
image on the right hand when the unit is carried.
○ Carry the unit without removing the air mat mounted on the basin and the film
tapes attached on the main body cover.
○ Do not hold the stepped part under the basin or the main body cover.
Make sure to carry it by two people. (See the image on the right hand.)
● Never hold the stepped part under the basin or the main body cover.
● Take care when handling the basin as it is heavy and fragile.
● Remove all metallic objects such as watches when carrying the basin.
CAUTION
● Take extra care to ensure not to damage the covers.
● Do not touch the basin body pipes.
CAUTION
Screw for fastening lid
※ The screw for fastening lid can
Doing so may cause damage to the main body cover.
If watches or belts are rubbing against basin, the basin may have a scar.
Doing so may cause water leaks.
The upper unit main has casters.
It can automatically roll down an incline or a slope.
Make sure to place it on a level floor surface.
The basin is unstable when it is not fixed to the floor.
Pay full attention to turnover.
be tightened with a coin, etc.
18
Straight slot screwdriver
Lid
Basin
Bumper
Advertisement
