Advertisement
５
Connection Check With The Upper Unit
1
Open the top panel swing.
1. Step on the assist button to lift the release lever.
①
Assist button
2
Fit the upper unit to the top panel swing.
Hold the basin and slowly move the upper unit forward.
Fit it so that the top panel swing of the floor unit is inserted
to the opening of the upper unit.
Keep moving it forward slowly until the upper unit is locked.
※ You feel a light click when it is locked.
● When the upper unit is transferred, securely hold the basin with
both hands and move it slowly.
Pay attention to any obstacles on the floor.
● When the upper unit is fit to the top panel swing and it comes near
the lock position, support the basin with your hand and move it
slowly. If you rush to fit it to the top panel swing or lock it, damage
to the devices or injury may be caused.
CAUTION
Positioning and securing completed.
3
Connect the piping
Depress the connecting pedal with your foot until a click sound is
heard to connect the supply/drainpipes.
※ Insert your foot to the end of the connecting pedal and step on the pedal further.
※ If it is not firmly secured, the connecting pedal will come up. Depress the pedal again.
＜If connection is difficult＞
Repeat depressing two or three times.
If it is still difficult, depress the detaching pedal and then retry the step 2 and 3.
Connection of hot water supply, water supply and drain completed.
CAUTION
①
Connection release lever
When the upper unit is transferred, check the surroundings of the upper unit.
Collision to a person or an object may result in injury or damage.
Do not stand on the connection pedal or apply excessive force.
It may damage the product or alter the shape of product.
2. While the assist button is held down, use another
foot to raise the release lever to the angle shown in
the image. The top panel swing opens.
Top panel swing
2
Opening of the upper unit.
[Lock position]
22
②
Top panel swing
Straight down
Connection pedal
Advertisement
