Advertisement
６ Finishing of floor surface (finishing of floor unit lid)
Laminate a floor panel of 3 mm thickness on the floor and the floor unit lid.
Contact an interior agency in advance to complete the lamination of the floor panel before installation of the floor unit.
CAUTION
● Laminate a floor panel of 3 mm thickness on the floor and the floor unit lid.
If not, normal detaching/attaching or shower outlet may be disturbed.
● Use a hard floor panel made of PVC tiles, etc.
● Do NOT use a cushion floor.
Using a cushion floor may cause troubles in detaching and attaching the upper unit.
● Laminate the floor panels so that the top end of the white bury frame is hidden and trim them to the opening.
※ When wood flooring or tiles are used around the openings, select a material equal to or thinner than 12 mm.
Otherwise, the floor unit cannot be secured.
※ Even in the case of the installation site with wood flooring or tiles used around the openings, laminate 3 mm thick
hard floor panels made of PVC tiles.
※ For the floor panels to laminate, the optional YUME OASIS floor panel kit is available in two colors.
Place another order if necessary.
Preparation for installation is completed. Go Installation Of Floor Unit on page 13.
Floor panel
These areas are also laminated with floor panels.
Floor panel
Floor unit lid
※Be sure to cut off in an exactly same shape as the cut window.
If not, the link mechanism of detaching/attaching might not work normally.
11
Maintenance Lid
Do not forget to cut off the portion for
the screw for fastening lid.
Cut off the shaded
portion
from the floor panel.
Advertisement
