Advertisement
■ Attachment Of The Hair Trap And The Drain Cap
Put the hair trap into the drain port and place the drain cap on the top as shown in the image.
■ Attach neck cushion
＜Back Wash Basin (YUME Basin)＞
1. Insert the neck cushion to the mounting bracket in the direction as shown in the image.
(Pay attention to the front/back direction.)
Front
Neck-holding pin
2. Attach the left hooks of the neck cushion to the neck-holding pins of the mounting bracket.
(Check that both front and back hooks are attached.)
3. Adjust the shape of the neck cushion to suit the mounting bracket,
and attach the basin side hooks of the neck cushion to the neck-holding pins.
(Check that both front and back hooks are attached.)
The neck-holding pins are detachable.
Take care not to lose the neck-holding pins.
CAUTION
● Arrange the shape of the neck cushion along the mounting bracket and attach the right hooks to the neck-holding pins
of the mounting bracket. When the neck cushion is removed, detach the four hooks from the neck-holding pins and lift
the neck cushion. If an excessive force is applied to forcibly detach the hooks, the part can be damaged.
● Check that the neck cushion is entirely contained in the basin and it is not folded or attached in a stressed condition.
The neck cushion may be damaged or water may splash from the front of the basin.
● Do not apply excessive force when the neck cushion is attached. The neck cushion may be damaged.
■ Attach the Head Pillow
Insert the head pillow in the
direction as shown in the image.
After Installation
Drain cap
Hair trap
Hook
Neck cushion
Back
Mounting bracket
Insert the neck cushions to inside.
Hook
Head Pillow
(underside)
Mounting bracket
27
Drain cap
Hair trap
Advertisement
