NEC Express5800/R120h-2M User Manual page 174

Chapter 2 Preparations
(2) Installing/removing the server
Be sure to observe the following precautions to use the server safely. Failure to observe the
precautions may cause burns, injury, and property damage. For details, refer to Safety Precautions
and Regulatory Notices.





1) Slide rail for 2U rack server N8143-133/134
(a)
Installation
Mount the server to a rack in the following procedure.
1. With two or more persons, firmly hold the server and mount it to the rack.
2. Make sure the inner rails on both sides are correctly inserted in the outer rail.
Push the device slowly into the back. Push the front lock until it clicks for the unit to be fixed.
174
Do not attempt to lift the server with single person.
Do not drop.
Do not leave the server being pulled out.
Do not install with the cover removed.
Do not get your fingers caught.
Important
Always install the server with two or more persons.
Express5800/R120h-2M User's Guide
CAUTION
2. Installation and Connection