Table of Contents
Advertisement
LAUNCH
firewall under the hood.
• In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers
1 through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
6.2.2 Manual Diagnosis
If the tool can not obtain the VIN information, you can also perform vehicle
diagnosis manually. In this mode, you need to execute the menu-driven
command and then follow the on-screen instruction to proceed.
*Notes:
• Before diagnosing, please make sure the diagnostic program corresponding to certain
vehicle model has been installed on your Pilot TPMS.
• For vehicles manufactured by different vendors, it is possible that it has different
diagnostic menus. For details, please follow the instructions on the screen to proceed.
Refer to the flowchart illustrated as below to diagnose a vehicle manually:
Select "Diagnose"
Select Vehicle
Manufacturer
Select Vehicle Model
(Note: For different vehicles,
vehicle make selection may
differ. Generally, we can
choose a vehicle via make
year. But for BENZ, we need
to choose it via chassis.)
28
Select test function
Automatic
(Note: This mode allows
your tool to scan the vehicle
test system automatically)
Select test system
(Note: In this case, you need to choose the
desired system manually. Just follow the
on-screen instructions to proceed.)
Pilot TPMS User's Manual
Read version
information
Read fault code
Clear fault code
Read data stream
Manual Select
Advertisement
Table of Contents
