LAUNCH TECH Pilot TPMS User Manual page 14

LAUNCH
Auto VIN
3
Detect
4 Update
5 Return
6 HOME
/
7
/
OBD-16
8
connector
9 5V Charging port
10 Power
11 OK
12 Screenshots
Diagnostic
13
Reports
8
Press it to quickly launch the auto VIN detection
module.
*Note: To detect more and accurate VINs, a stable
network connection is highly recommened for this
function.
A quick access to the Update module.
*Note: This function requires a stable network
connection.
Exit the current program or return to the previous
screen.
Press to the home(Job menu) screen.
Move cursor up and down for selection.
Move cursor left or right for selection; Or turn
page up and down when more than one page is
displayed.
To connect to vehicle's DLC (Data Link Connector)
via diagnostic cable.
To connect to external DC power for charging
Pilot TPMS.
• In Off mode, press it for about 5 seconds to turn
the handset on.
• In On mode:
• Press it to activate the LCD if the LCD is off.
• Press it to turn off the LCD if the LCD lights
up.
• Press it for 3 seconds to turn it off.
Confirms a selection (or action) from a menu list.
Press it once to capture the current screen. All
screenshots are saved in the "Image" folder of
"Data".
A quick dial to the "Diagnostic Reports" module.
Alternatively, it can also be accessed by "Data" ->
"Diagnostic Report".
Pilot TPMS User's Manual