Resetting - LAUNCH TECH Pilot TPMS User Manual

LAUNCH

6.5 Resetting

In addition to amazing & powerful diagnostic function, Pilot TPMS also features
6 reset functions.
There are two methods to reset service lamp: Manual reset or Auto reset. Auto
reset follows the principle of sending command from Pilot TPMS to vehicle's
ECU to do resetting. While using manual reset, users just follow the on-screen
instructions to select appropriate execution options, enter correct data or values,
and perform necessary actions, the system will guide you through the complete
performance for various service operations.
Follow the flowchart shown as below to perform resetting.
Select "Reset"
Choose the desired service
function (e.g. oil lamp reset
etc.)
Select the desired car brand
Select the reset mode (The
available mode varies from
vehicle to vehicle)
Follow the on-screen
instructions to proceed
Pilot TPMS User's Manual
EN
39