LAUNCH
3.2 Bluetooth setting
Enter X-431 PRO Bluetooth setting screen ("Settings" --> "Wi-Fi" --> "Bluetooth"),
slide the Bluetooth switch to ON and X-431 PRO will start searching available
Bluetooth device, click the desired connector to piar and match.
By default, the Bluetooth name is 98269*****00 (where ***** stands for 5 digits.).
Note: Bluetooth setting must be done before using the software.
3.3 Diagnosis flowchart
For new users, please follow the operation chart shown in Fig. 3-2 to get familiar
with and start using X-431 PRO.
X-431 PRO User's Manual — Vehicle Diagnosis
Fig. 3-2
8