Diagnose; Connection; System Diagnosing - LAUNCH TECH Pilot TPMS User Manual

LAUNCH

6. Diagnose

6.1 Connection

1. Turn the ignition off.
2. Locate vehicle's DLC socket: It provides standard 16 pins and is generally
located on driver's side, about 12 inches away from the center of dashboard.
See Figure 2-2. If DLC is not equipped under dashboard, a label indicating
its position will be given. In case no DLC is found, please refer to Automobile
Repair Manual.
3. Plug one end of the diagnostic cable into the DB-15 connector of Pilot TPMS,
and tighten the captive screws. Connect the other end to the vehicle's DLC.

6.2 System Diagnosing

This function is specially designed to diagnose electronic control systems of
single vehicle model.
26
Vehicle's DLC
Diagnostic Cable
Figure 6-1
Pilot TPMS User's Manual
Pilot TPMS