Diagnosis Flowchart; User And Connector Registration; User Registration - LAUNCH TECH X-431 V+ User Manual

LAUNCH
start searching available Bluetooth device, tap the desired connector to pair and
match.
By default, the Bluetooth name is 98374*****00 (where ***** stands for 5 digits.).
Note: In case no Bluetooth setting is done before diagnostic software is
launched, you can also configure it while using the software. For details on
Bluetooth connection, please refer to "Chapter 4.6 Start diagnosing".

4.3 Diagnosis flowchart

For new users, please follow the operation chart shown in Fig. 4-2 to get familiar
with and start using X-431 V+.

4.4 User and connector registration

4.4.1 User registration

Tap the program icon on the desktop to launch the application, a disclaimer page
X-431 V+ User's Manual — Vehicle Diagnosis
Fig. 4-2
17