LAUNCH TECH Pilot TPMS User Manual page 28

LAUNCH
Manual (In this mode, user can manually input the sensor IDs which are
determined by user own.)
The Manual allows users to program a new Sensor with the ID of an TPMS
sensor. Select a wheel location on the display and place a Sensor near the top
right corner of the tool and then tap Manual to program the new Sensor.
Tap Manual. When the input box displays, enter the ID of the sensor. Tap OK
when finished.
Follow the instructions on the screen to proceed.
22
Fig. 5-17
Fig. 5-18
Pilot TPMS User's Manual