Installer Manual Fleck 5600 - SXT - Programming
6.5.3. Display format mode (DF)
Select the unit of measure.
Options:
•
GAL: U.S. Gallons and 12-Hour AM/PM;
•
Ltr; Liters and 24-Hour.
E
Press
or
F
Press
to validate the selection and move to the next parameter.
6.5.4. Regeneration mode (VT)
Select the regeneration mode.
Options:
•
dF1b: Standard downflow single backwash (standard);
•
Othr: Other;
•
UFtr: Upflow filter (for 5000 filter);
•
UFbd: Upflow brine first;
•
FLtr: Filter, to be used with standard piston only (except 5000);
•
dF2b: Standard downflow double backwash.
G
Press
or
H
Press
to validate the selection and move to the next parameter.
6.5.5. Regeneration control type (CT)
Select the regeneration controller type.
Options:
•
Fd: Meter delayed;
•
FI: Meter immediate;
•
tc: Time clock;
•
dAY: Day of the week.
I
Press
or
J
Press
to validate the selection and move to the next parameter.
52 / 92
to select the unit.
to select the regeneration flow.
to select the regeneration control type.
Ref. MKT-IM-013 / A - 21.12.2016