Brother GTX Series Reference Manual page 3

Pre Pre
Treatment Treatment
1/2 distilled 1/2 distilled
water water
Add an Open-cells silicon sheet under the T-shirt to extract steam more easily and to have even PT layer
HEATPRESS & TUNNEL DRYER SETTINGS for INK CURING
HEATPRESS
Ink
Curing
TUNNEL DRYER
Ink
Ink
Curing Curing
Check the Real Temperature with a Probe or with Strips to be sure that you are safe for washability!
The Brother GTX should ALWAYS be left with Power ON
NEVER shut OFF the printer except if requested by the display informations !
Power is requested to perform the needed recirculation of the inks from time to time
NEVER POWER OFF THE PRINTER !
HEAT PRESS SETTINGS for Pre-Treatment DRYING
35 35
Seconds Seconds
35 35
Seconds Seconds
3,30 3,30
Minutes Minutes
180°C 180°C
360°F 360°F
0,7 - 1,4 0,7 - 1,4
180°C 180°C
360°F 360°F
160°C 160°C
320°F 320°F
VERY IMPORTANT
POWER
5 - 5,5 5 - 5,5
Bars Bars
75 - 80
75 - 80
PSI PSI
Bars Bars
10 - 20 10 - 20
PSI PSI
3