Operation - Makita CG100D Instruction Manual

OPERATION

Using cartridge
Preparing cartridge for use
1. Cut the tip of the cartridge nozzle so that the suit-
able amount of caulking material is fed.
1
1. Nozzle
the nozzle.
1
1. Nozzle
Attach the nozzle to the cartridge.
NOTICE:
cartridge may cause malfunction.
NOTICE:
NOTICE:
cartridge.
1. Pull the rod handle backward slowly until it stops.
1. Rod handle
Insert the cartridge into the holder as shown in the
Push the rod gently until the piston touches the
bottom of cartridge.
dure in reverse.
NOTICE:
ton for cartridge.
1. Remove the holder cap from the holder, and then
pull the rod handle backward slowly until it stops.
-
-
1
1. Holder cap
Insert the cartridge into the holder.
9 ENGLISH
Rod handle
1
-
-
2