Functional Description - Makita CG100D Instruction Manual

Tips for maintaining maximum
battery life
1.
2.
3.
FUNCTIONAL
DESCRIPTION
CAUTION:
CAUTION:
CAUTION:
cause them to slip off your hands and result in damage to
1
2
1. Red indicator Button
while sliding the button on the front of the cartridge.
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
-
-
3
Battery cartridge
If not,
5 ENGLISH
Battery protection system
extend battery life.
tool and/or battery are placed under one of the following
conditions:
an abnormally high current.
In this situation, turn the tool off and stop the application
the tool on to restart.
If the tool does not start, the battery is overheated. In
this situation, let the battery cool before turning the tool
on again.
will not operate. If you turn the tool on, the motor runs
again but stops soon. In this situation, remove and
recharge the battery.
capacity
Only for battery cartridges with the indicator
1. Indicator lamps
Press the check button on the battery cartridge to indi-
light up for a few seconds.
Indicator lamps
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
1
2
Check button
Remaining
capacity
Off