Operation - Makita DCG140 Instruction Manual

Remove the holder cap from the holder.
1
1. Holder cap
Insert the cartridge into the holder.
of the cartridge.
take out the cartridge.
NOTICE:
age before installing. Do not use damaged car-
tridge, otherwise the tool may be damaged.
adhered material on the cartridge.
NOTICE:
(600ml) only.
Remove the holder cap, the nozzle and the rubber ring
from the holder.
2
3
1. Rubber ring 2. Nozzle 3. Holder cap
NOTE:
damage before installing. Do not use damaged
pack, otherwise the tool may be damaged.
-
NOTICE:
holder (600ml).
Remove the holder cap, the nozzle and the rubber ring
from the holder.
Make sure the rod handle is placed at the most front
position.
Dip the mouth of the holder into the caulking material.
NOTICE:
every day's work. Otherwise adhered caulking
material may cause tool breakage.

OPERATION

CAUTION:
the rod and the housing of the tool.
NOTICE:
and damage to the tool.
moment, and try to pull the rod out after the motor
stopped. If the rod is still clogged, perform the
same action until the rod is able to move.
9 ENGLISH
1