Makita CG100D Instruction Manual page 3

Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
a power tool. Distractions can cause you to lose control.
Electrical Safety
1.
and matching outlets will reduce risk of electric shock.
2.
refrigerators.
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
increase the risk of electric shock.
5.
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
supply. Use of an RCD reduces the risk of electric shock.
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1.
ication. A moment of inattention while operating
2.
protection.
non-skid safety shoes, hard hat or hearing protection used
3.
to power source and/or battery pack, picking
that have the switch on invites accidents.
4.
A wrench or a key left attached to a
5.
balance at all times.
of the power tool in unexpected situations.
6.
long hair can be caught in moving parts.
Damaged or entangled cords
However,
Carrying power tools with
dust extraction and collection facilities, ensure
dust collection can reduce dust-related hazards.
-
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
9.
-
It is an employer's responsibility to enforce
-
Power tool use and care
1.
power tool for your application.
rate for which it was designed.
2.
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3.
-
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
tools are dangerous in the hands of untrained users.
5.
are caused by poorly maintained power tools.
6.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
3 ENGLISH
Use of
-
-
-
Power
-
Many accidents
Properly