The FC7100 employs the ANDROID OS The FC7100 employs the ANDROID OS . 4 x I²S out The FC7100 is designed as an open platform The FC7100 is designed as an open platform 4 x UART for any Android apps intended for a mobile...
FC7100 in a standalone ECU, interfaced to a premium headunit ................13 4.3 Smart Display: the FC7100 is behind the LCD, in the same housing Smart Display: the FC7100 is behind the LCD, in the same housing ........
(TTS) . Parrot has adapted the Android framework for automotive use cases. FC Parrot has adapted the Android framework for automotive use cases. FC 7 100 embeds also the 100 embeds also the standard suite of Parrot automotive libraries for connectivity...
Page 5
Ref: OEM-2012-149 Built- in video hardware encoder and decoder, with Mali in video hardware encoder and decoder, with Mali - 400 GPU embedded al 400 GPU embedded al lowing HD video playback and best-in-class HMI Multiple video interfaces and Ethernet connectivity Multiple video interfaces and Ethernet connectivity for multiple cameras and multiple LCD multiple cameras and multiple LCD screens interface.
Ref: OEM-2012-149 3 FC7 100 technology 100 technology • Android 2.3 and 4.2 Linux based Hardware independent Hardware independent Large number of applications available Large number of applications available Web Browser included Web Browser included Easy Specific HMI design with Android SDK Easy Specific HMI design with Android SDK •...
Page 8
Ref: OEM-2012-149 o FTP 1.0 o Image transfer over OPP Image transfer over OPP o DUNP 1.1 o Software update over SPP Software update over SPP o Secure Simple Pairing Secure Simple Pairing • Digital Signal Processing Digital Signal Processing Microphone(s), the module can manage two configurations: the module can manage two configurations: o Single microphone...
4 Vehicle Integration The FC7100 module can be integrated behind the LCD display, inside the headunit, or in a standalone Electronic Control Unit (ECU) locate module can be integrated behind the LCD display, inside the headunit, or in a standalone Electronic Control Unit (ECU) locate module can be integrated behind the LCD display, inside the headunit, or in a standalone Electronic Control Unit (ECU) locate d somewhere in the vehicle and co nnected to the vehicle bus (e.g.
Ref: OEM-2012-149 4.1 FC7100 in a standalone ECU, interfaced to an entry headunit FC7100 in a standalone ECU, interfaced to an entry headunit Confidential Information Information 12/39...
Ref: OEM-2012-149 4.2 FC7100 in a standalone ECU, interfaced to a premium headunit FC7100 in a standalone ECU, interfaced to a premium headunit HSPA SDCard module (option) GPS antenna USB Hub Apple UC Composite Video RF Signal Receiver Composite FC7100...
Ref: OEM-2012-149 4.3 Smart Display: the FC7100 is behind the LCD, in the same housing Smart Display: the FC7100 is behind the LCD, in the same housing Confidential Information Information 14/39...
Page 15
Ref: OEM-2012-149 4.4 FC7100 integrated into the headunit Confidential Information Information 15/39...
Page 16
Ref: OEM-2012-149 4.5 Rear Seat Entertainment network LVDS LVDS I²C chip CD, FM t uner, Audio Amplifier uner, Audio Amplifier FC7100 I²S ADC chip ethernet I²S ADC chip RSE system #1 LVDS LVDS I²C chip FC7100 I²S ADC chip Control Control I²S...
Page 17
Ref: OEM-2012-149 4.6 Components P roposal for roposal for Vehicle Integration • SPDIF transceiver : SIRUS LOGIC SIRUS LOGIC - CF8406 • LVDS Serializer : T exas Instrument exas Instrument - DS90UB925Q • LVDS Serializer : Texa s Instrument s Instrument - DS90UB928Q •...
The FC7100 design is based on the Parrot A The FC7100 design is based on the Parrot A SIC P 7, the latest dual core processor chip from Parrot. It 7, the latest dual core processor chip from Parrot. It...
Page 19
5.1.1.4 Memory The FC7100 basi c Memory configuration is 8 Gbits NAND Flash and 8 Gbits DDR3 RAM. These c Memory configuration is 8 Gbits NAND Flash and 8 Gbits DDR3 RAM. These c Memory configuration is 8 Gbits NAND Flash and 8 Gbits DDR3 RAM.
Page 21
Ref: OEM-2012-149 5.1.4 Pin Out Table Here below the FC7100 main connector (140 pins): Here below the FC7100 main connector (140 pins): Power Function Type Description Domain USB_0_DN USB_0_DN USB 0 Data - USB_0 USB_0_DP USB_0_DP USB 0 Data +...
Page 22
Ref: OEM-2012-149 Power Function Type Description Domain Ground 3V3_MAIN 3V3_MAIN 3V3_MAIN 3V3_MAIN 3V3_MAIN Power supply : 3v3 Power supply : 3v3 3V3_MAIN 3V3_MAIN 3V3_MAIN 3V3_MAIN USB_1_DP USB_1_DP USB 1 Data + USB 1 Data + USB_1 USB_1_DN USB_1_DN USB 1 Data - Ground BOOT BOOT...
Page 23
Ref: OEM-2012-149 5.1.4.1 Pin number definition Pin number definition 5.1.5 RF connectors location RF connectors location 2.4 GHz 5 GHz Confidential Information 23/39...
Power supplies & management FC7100’s processor’s digital I/O are mainly referenced to a 3 FC7100’s processor’s digital I/O are mainly referenced to a 3 ,3V voltage, Ethernet interface can be configured either in 1,8V, 2,5V or 3,3V. Ethernet interface can be configured either in 1,8V, 2,5V or 3,3V.
5.3 External communication interfaces External communication interfaces FC7100 module uses several means to interface with the system it is integrated in. FC7100 module uses several means to interface with the system it is integrated in. FC7100 module uses several means to interface with the system it is integrated in.
Page 26
Ref: OEM-2012-149 Please note that it is forbidden to apply a VIH on an unpowered GPIO, so when its VDDO isn’t Please note that it is forbidden to apply a VIH on an unpowered GPIO, so when its VDDO isn’t Please note that it is forbidden to apply a VIH on an unpowered GPIO, so when its VDDO isn’t supplied.
Page 27
3,3V bus. Its maximum clock frequency is 48 MHz Its maximum clock frequency is 48 MHz . 5.3.8 MPEG TS FC7100 has 2 Transport Stream MPEG FC7100 has 2 Transport Stream MPEG interfaces. Confidential Information 27/39...
Page 28
FC7100 module provides digital audio interface only. The digital audio inter face of the FC7100 is composed of 16 pads, that can be configured in various face of the FC7100 is composed of 16 pads, that can be configured in various...
Page 29
5.3.11.3 Display and record interface option. Display and record interface option. The i nput/ouput video interfaces are nput/ouput video interfaces are multiplexed on the main FC7100 connector. (See paragraph: on the main FC7100 connector. (See paragraph: 1.1.4 Pinout Table) •...
0,635 mm pitch • 6.3 Connectors 6.3.1 FC7100 Main connector FC7100 Main connector The module’s interface with host systems is made through a 140 The module’s interface with host systems is made through a 140 - pin board to board connector with a pin board to board connector with a 0.635mm pitch.
Page 33
Ref: OEM-2012-149 6.3.2 BT, WLAN and GPS external antenna connector external antenna connector s Theses RF connectors are of Theses RF connectors are of ultra-small coaxial type: Confidential Information 33/39...
Ref: OEM-2012-149 6.4 Thermal integration guidelines (TBC) Thermal integration guidelines (TBC) The local maximum ambient air temperature (T The local maximum ambient air temperature (T = 85°C) can be supported by thermal = 85°C) can be supported by thermal amb max dissipation system (example: heatsink) heatsink) with: θ...
Ref: OEM-2012-149 8 Marking 8.1 Module Marking 8.1.1 Label 8.1.2 Position and Orientation on m Position and Orientation on m odule 9 Caution for use 9.1 ESD Compliance Operator must use ESD protection gloves for Module Manipulation. In case of electrical Operator must use ESD protection gloves for Module Manipulation.
9.4 Drop In case the part drop to the floor, Parrot doesn’t warrant the part. Part has to be scrapped. In case the part drop to the floor, Parrot doesn’t warrant the part. Part has to be scrapped.
FCC and IC requirements for module application Identifications: FCC ID: RKXFC7100 IC : 5119A-FC7100 In acco rdance with FCC Part 15, the FC rdance with FCC Part 15, the FC 7 100 is listed as a limited Modular Transmitter device.
Page 38
Ref: OEM-2012-149 cause harmful interference to radio or television reception, wich can be determined by turning cause harmful interference to radio or television reception, wich can be determined by turning cause harmful interference to radio or television reception, wich can be determined by turning the equipment off and on, the user is encouraged to try to correct the in the equipment off and on, the user is encouraged to try to correct the in the equipment off and on, the user is encouraged to try to correct the in terference by one or...
Page 39
Ref: OEM-2012-149 10.3 Japanese Radio Law and Japanese Telecommunications Business Law Japanese Radio Law and Japanese Telecommunications Business Law Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law ( This device is granted pursuant to the Japanese Radio Law ( 電波法) and the Japanese Telecommunications Business Law ( and the Japanese Telecommunications Business Law ( 電気通信事業法) This device should not be modified (otherwise the granted designation number will...