Do you have a question about the PS7100 and is the answer not in the manual?
Questions and answers
eileen goldner
March 8, 2025
My phone stopped connecting to Bluetooth Parrot ps7100. How do I get it to connect again?
1 comments:
Mr. Anderson
March 8, 2025
To reconnect your phone to the Parrot PS7100 via Bluetooth, follow these steps:
1. Enable Bluetooth on Your Phone - Go to your phone's Bluetooth settings. - Ensure Bluetooth is turned on.
2. Check the Parrot PS7100 Power - Make sure the Parrot PS7100 is powered on and in pairing mode. - If not automatically in pairing mode, restart the device.
3. Select the Parrot PS7100 on Your Phone - In your phone’s Bluetooth settings, look for the Parrot PS7100 under available devices. - If listed, select it to reconnect. - If not listed, try searching for new devices.
4. Pair the Devices (If Needed) - If prompted, enter the pairing code (usually "0000" or "1234"). - Confirm the pairing request on both devices.
5. Check Connection Status - Once paired, your phone should show the Parrot PS7100 as connected. - Test by making a call or playing audio.
6. Troubleshooting (If Reconnection Fails) - Restart both your phone and the Parrot PS7100. - Remove the Parrot PS7100 from your phone’s Bluetooth list and pair it again. - Ensure no other devices are interfering with the connection. - Confirm the Parrot PS7100 is not connected to another device.
Following these steps should help you successfully reconnect your phone to the Parrot PS7100.
Need help?
Do you have a question about the PS7100 and is the answer not in the manual?
Questions and answers
My phone stopped connecting to Bluetooth Parrot ps7100. How do I get it to connect again?
To reconnect your phone to the Parrot PS7100 via Bluetooth, follow these steps:
1. Enable Bluetooth on Your Phone
- Go to your phone's Bluetooth settings.
- Ensure Bluetooth is turned on.
2. Check the Parrot PS7100 Power
- Make sure the Parrot PS7100 is powered on and in pairing mode.
- If not automatically in pairing mode, restart the device.
3. Select the Parrot PS7100 on Your Phone
- In your phone’s Bluetooth settings, look for the Parrot PS7100 under available devices.
- If listed, select it to reconnect.
- If not listed, try searching for new devices.
4. Pair the Devices (If Needed)
- If prompted, enter the pairing code (usually "0000" or "1234").
- Confirm the pairing request on both devices.
5. Check Connection Status
- Once paired, your phone should show the Parrot PS7100 as connected.
- Test by making a call or playing audio.
6. Troubleshooting (If Reconnection Fails)
- Restart both your phone and the Parrot PS7100.
- Remove the Parrot PS7100 from your phone’s Bluetooth list and pair it again.
- Ensure no other devices are interfering with the connection.
- Confirm the Parrot PS7100 is not connected to another device.
Following these steps should help you successfully reconnect your phone to the Parrot PS7100.
This answer is automatically generated