Assembly; Drop - Parrot FC7100 Product Data Sheet

9.3 Assembly

Key mechanical dimensions are tested before shipment. Key mechanical dimensions are tested before shipment.
In case of manual ha ndling or operation, to avoid any issue with mechanical distance between
legs and ensure a good insertion in the host side, packaging has been designed to ensure that legs and ensure a good insertion in the host side, packaging has been designed to ensure that legs and ensure a good insertion in the host side, packaging has been designed to ensure that
operator will pick up the part by the most adequate area of the module. Operator should b operator will pick up the part by the most adequate area of the module. Operator should b operator will pick up the part by the most adequate area of the module. Operator should b e
trained and alerted about this specific behavior. trained and alerted about this specific behavior.

9.4 Drop

In case the part drop to the floor, Parrot doesn't warrant the part. Part has to be scrapped. In case the part drop to the floor, Parrot doesn't warrant the part. Part has to be scrapped. In case the part drop to the floor, Parrot doesn't warrant the part. Part has to be scrapped.
Same process applies in our manufacturing site. Same process applies in our manufacturing site.
ndling or operation, to avoid any issue with mechanical distance between ndling or operation, to avoid any issue with mechanical distance between
Confidential Information
Ref: OEM-2012-149
36/39