Modify_Speed; Connection_Time - JDS Uniphase SKB SERIES User Manual

Response packet
OPCODE Length
0xB9 0x01

MODIFY_SPEED

Description Modify the speed setting of the specified switch
Parameters Switch, Speed
Parameter Switch (unsigned eight-bit)--switch number
Description Speed (unsigned eight-bit)--speed setting for specified switch
Command packet
OPCODE Length
0x3A 0x02

CONNECTION_TIME?

Description Query the time to connect two channels, in ms. This test breaks the current
connection.
The SKB switch allows the user to confirm the specified time to switch
between channels. The CONNECTION_TIME? query physically checks the
time by switching between the start and destination channel and outputs the
results from the internal clock.
Parameters U8 Switch, U8 Start, U8 Destination
Parameter Switch (unsigned eight-bit)--switch number
Description Start (unsigned eight-bit)--output channel to begin measurement
Destination (unsigned eight-bit)--destination output channel
U8 Speed
Speed (unsigned eight-bit)--The speed setting of the switch (1 to 5)
1 is the slowest speed with the highest repeatability.
Only speeds 1 and 2 are implemented at this time.
U8 Switch, U8 Speed
Switch (unsigned eight-bit)--Logical switch number (1 to 4)
Speed (unsigned eight-bit)--The speed setting of the switch (1 to 5)
1 is the slowest speed with the highest repeatability.
Only speeds 1 and 2 are implemented at this time.
Parameters
Parameters
Operating and Maintenance Instructions – 49